Below you will see a selection of flags and their associations. There are many different flags and they often change and evolve over time. We will try to keep this page as updated as possible, but if you do notice an error, please contact the guide editor on the home page.

Image

It is unknown when the demisexual flag was created and by whom, but it is presumed it was created after 2010 as it is based off the asexual flag.

The 6' spinning flagpole is intended to fly flags up to 3' x 5' in size.  Flying flags larger than 3' x 5' from these rotating flag poles will eliminate the spinning feature.

The Labrys Lesbian Flag was created in 1999 by Sean Campbell. To learn more about the history of this flag, check out the resources below!

Our 6' spinning flagpoles are a great way to display your American Flag.  These flagpoles are the most popular selection for both residential display of the US flag as well as for businesses who display the flag with a wall mounted pole.  The poles are also widely used  by real estate agents who fly model, open house and other assorted message flags commonly from homes they have listed.  These unique flagpoles utilize ball bearings in the center of the pole that allows them to spin keeping your flag from becoming tangled and furled. Spinning flagpoles are available as either a kit with a 3x5’ American flag and bracket, but are also sold separately. They are available in three finishes: white, silver or wood grain veneer. Learn how to assemble one of our spinning flagpoles and how to attach a flag to a pole below.

The updated Lesbian Pride Flag was created in 2019 by Emily Gwen. It is celebrated for its inclusivity. To learn more about the flag, check out the links below!

The Bisexual Pride Flag was created in 1998 by Michael Page. To learn more about the history of the flag, check out the resources below!

To fly a traditional style flag that has a canvas header and brass grommets:  attach the flag to the pole using the supplied flag fasteners.  Remove the screw portion of the flag fastener from the ring with your hand.  Align the top grommet hole in the flag with the hole in the flag fastener ring and reinsert the screw into the flag fastener ring and tighten.  Repeat the process for the bottom grommet as well. For this application you will not be using the metal clip at the top of the spinning flagpole, just beneath the decorative finial.

As mentioned in the description of the Rainbow Flag, the original Pride Flag included the colors turquoise and pink. This flag is sometimes referred to as the Gilbert Baker Pride Flag. The creator, Gilbert Baker, designed the flag for each color to be representative. To learn more about this original flag design, check out the resources below!

The Pansexual Pride Flag was created by Gilbert Baker and has been in use since the mid-2010s. To learn more about this flag, check out the resources below!

The POC (Person of Color) Rainbow Flag is a semi-recent addition. The flag was created as part of a campaign launched by the Philadelphia Office of LGBT Affairs to be more inclusive.

Begin assembling the flagpole by joining the top and bottom sections together by inserting the male threads on the top pole section into the female threads on the bottom pole section and twist to tighten.  As the two sections begin to tighten, hold the lower most portion of the top section (just above the threads) with your hand or a pair of pliers and completely tighten the bottom section until the two sections are flush.

The Rainbow Flag is probably the most recognized flag out of all of them. This flag has an interesting history as it originally include two additional colors: pink and turquoise. However, throughout the years the two colors were dropped for various reasons, resulting in the six-colored flag we see today. To learn more about the history of this flag, check out the resources below!

The Polysexual Flag was created in 2012 by a user on Tumblr. To learn more about the history of this flag, check out the resources below!

The trans pride flag was designed by Monica Helms, an openly transgender American woman, in August 1999.To learn more about it, check out the resources below!

If you are attaching a banner style flag with a pole sleeve, omit the flag fasteners.  Slide the bottom of the flagpole through the sleeve of the flag.  Banner style flags with have a tab sewn into the pole sleeve with a slit in the tab.  Clip the metal hook at the top of the of the pole through the opening in the tab and your flag is secure.

The Asexual Pride Flag was created in 2010. To learn more about the history of this flag, check out the resources below!