Jul 15, 2024 — Virginia Governor Glenn Youngkin has ordered flags to be lowered and remain at half-staff in honor of the man who was shot and killed at a ...

France flag

Works on square, rectangular, round or oval shaped railings from 3/8” up to 2” in diameter. Works with fences and railings of virtually any material including wrought iron, aluminum, or wood. Meant only for balconies on ground-level front porch use, wrought iron and chain link fences around your home or business. All our kits are fundamentally for ground level use. Package includes the NeverFurl Rail Mount Bracket, 6-foot Aluminum Pole (1" diameter, 058" wall thickness, in 2 sections), Brass Acorn and 1" White NeverFurl Non-Furling Device, with Flag Clips.

GET SPARE RINGS! They are like a spare tire in a car. Like shoe laces, one day you will likely need another one. You could over tighten the ring and crack it. You could strip the thread or lose the thumb screw in the grass. You could always order a ring later but due to its thickness is costs $4.00 postage just to mail a single ring!

Pole 6'x1" wHITE aluminum spinning flagpole with pole rings for attaching the flag. Be sure check your thumb screw. Check it regularly to be sure it is snug.

Royal standard of canada

Custom Made Flags · Custom Flags & Banners ... NORTH CAROLINA NC State Flag US State Flags 2x3 ft Polyester TT38 ... sell are weight-based. The weight of any such ...

The Mozambican flag today has green, black, and yellow horizontal stripes separated by white fimbriations with a red triangle in the hoist.

The Moose flag bracket displays the flag at the steeper 30 degree angle shown. This angle also helps better than the 45 degree angle to prevent- but not eliminate- flag wrap.

Tricolor flag

The unique design of this high-quality, easy to install kit, features an adjustable clamp that mounts a 6' aluminum flagpole on fences & railings.

GET SPARE RINGS! They are like a spare tire in a car. Like shoe laces, one day you will likely need another one. You could over tighten the ring and crack it. You could strip the thread or lose the thumb screw in the grass. You could always order a ring later but due to its thickness is costs $4.00 postage just to mail a single ring!

Our classic flag kit gives you a spinning flagpole that helps prevent your flag from wrapping around the pole. This two piece non rusting aluminum pole has ball bearings between the sections that allow the top flagpole section and the flag attached to it to spin independently from the bottom section.

Be Prepared : Buy extra EZ Mount rings with the purchase of a kit per ring and it won't increase your shipping. The thumb screw is included.

This inside wall flagpole side mount bracket fits where others won't. Goes inside door frames, side of garage doors, on decks. A sideways flag pole holder. Flag and bracket MADE IN USA   Your flag is held on the pole with the EZ Mount pole ring. The flag is easy to mount and unmount with the thumb screw that grips the pole through the grommet. GET SPARE RINGS! They are like a spare tire in a car. Like shoe laces, one day you will likely need another one. You could over tighten the ring and crack it. You could strip the thread or lose the thumb screw in the grass. You could always order a ring later but due to its thickness is costs $4.00 postage just to mail a single ring! When sold separately they are $1.99 per EZ Mount ring plus $4.00 postage just to mail a single ring! Be Prepared : Buy extra EZ Mount rings with the purchase of a kit per ring and it won't increase your shipping. The thumb screw is included.     The "Classic" American Flag Kit #K34 $90.40, two for $160.00 A 3x5' flag with a 6' pole is the oldest and most common size combination. Our classic flag kit gives you a spinning flagpole that helps prevent your flag from wrapping around the pole. This two piece non rusting aluminum pole has ball bearings between the sections that allow the top flagpole section and the flag attached to it to spin independently from the bottom section. Your new flag kit contains: 3x5' MADE IN USA Nylon American flag with embroidered stars and sewn stripes. Flag is finished with heading and grommets (Part #EAGLE35) 6'x1" Non rusting silver aluminum flagpole complete with EZ Mount rings to attach flag and ornamental gold ball (Part #AP72S) Stainless steel hefty flagpole bracket with stainless steel screws. (Part # WB26) Click images to enlarge: Embroidered stars American flag made in USA Click images to enlarge This is your new flagpole bracket! And it is nothing like the one you will find in big box store. Real hefty, stainless steel, not one that is ever likely to break. It can't rust either. Supplied with stainless steel wood screws too. Your bracket comes with a set screw for gripping the pole tight in windy areas Your flag is held on the pole with the EZ Mount pole ring. The flag is easy to mount and unmount with the thumb screw that grips the pole through the grommet.Bright mirror finish plastic flagpole ball.   This is the joint separating the two pole sections at the lower grommet where the ball bearings separate the upper and lower sections. Just screw the two sections together and you're all set.     The "Classic" American Flag Kit, you get all of the above   Would you like to step it up a notch? Treat yourself with these upgrades: Upgrade to our even more massive Moose stainless steel bracket; provides a four-hole broader base footprint for greater strength, stability and gripping power to the mounting surface. Bright chrome mirror finish you'll be proud to display. The Moose flag bracket displays the flag at the steeper 30 degree angle shown. This angle also helps better than the 45 degree angle to prevent- but not eliminate- flag wrap.  #WB34 ADD $24.00Upgrade Swap the standard silver pole with a gold ball for a silver pole with a sliver ball ball: ADD $1.00     Click to enlargeAmerican Flag Railing Kit #K27 $149.00 Plus shipping/handling which we must quote based on a specific verifiable UPS address. Flag kits are not returnable. The unique design of this high-quality, easy to install kit, features an adjustable clamp that mounts a 6' aluminum flagpole on fences & railings. Works on square, rectangular, round or oval shaped railings from 3/8” up to 2” in diameter. Works with fences and railings of virtually any material including wrought iron, aluminum, or wood. Meant only for balconies on ground-level front porch use, wrought iron and chain link fences around your home or business. All our kits are fundamentally for ground level use. Package includes the NeverFurl Rail Mount Bracket, 6-foot Aluminum Pole (1" diameter, 058" wall thickness, in 2 sections), Brass Acorn and 1" White NeverFurl Non-Furling Device, with Flag Clips. INCLUDES 3X5' Nylon American flag with Embroidered Stars and Sewn Stripes MADE IN USA             The url for this page is http://flagguys.com/kits.html

Agitation for a distinctive Canadian flag increased following World War II. While the Canadian Red Ensign was recognized for use on government buildings and as a national flag abroad, many felt that it did not properly identify the distinctive local culture and traditions. Heated debate took place in 1964 following the promise of Prime Minister Lester B. Pearson that Canada would acquire its own national flag prior to the centennial of confederation in 1967. Months of public and parliamentary debate resulted in approval (December 1964) of the new Maple Leaf Flag, which became official by royal proclamation on February 15, 1965, and is now broadly supported by the Canadian population. The maple leaf had been a national symbol since at least 1868, and its red colour has been described as a symbol of Canadian sacrifice during World War I. Pearson’s original flag proposal showed three red maple leaves on a white field with narrow blue vertical stripes at either end. Several individuals have been credited with suggestions that resulted in the final design, which broadened the stripes and changed them to red to emphasize the national colours (red and white). A single maple leaf gave a distinctive and easily recognizable central symbol.

20231027 — Flags statewide should be flown at half-staff from now until sunset on Monday, Oct. 30. Gov. Holcomb is requesting residents and businesses to ...

British flag

Plus shipping/handling which we must quote based on a specific verifiable UPS address. Flag kits are not returnable.

Pole: White 5' x 1" Spinning Aluminum Flagpole With Gold Ball. The flagpole contains ball bearings and spins to help cut down on flag wrap.

Don't want to try installing a bracket into your vinyl siding, brick, or stucco? Here is an upscale side mount flagpole kit that solves a lot of problems!

Be Prepared : Buy extra EZ Mount Rings with the purchase of a kit per ring, and it won't increase your shipping. The thumb screw is included.

SIZE: Many of you have called to ask the exact size of this side mount flag holder. You say you have real tight squeezes. Ok, here it is: Positioned as you see it mounted there, the flat mounting base takes up an outside footprint of 3.5"x3.5". Said another way, if you were to replace the two triangular corners missing from that otherwise square base, you would have a 3.5x3.5" square. The distance between the left most screw hole and the right most hole is about 2 7/8" on center. The distance between the top hole and the bottom hole is about the same. I can't be any more specific. If your needs are super exacting, please get one in your hand and try it out.

Flag of british canada

#WB34 ADD $24.00Upgrade Swap the standard silver pole with a gold ball for a silver pole with a sliver ball ball: ADD $1.00     Click to enlargeAmerican Flag Railing Kit #K27 $149.00 Plus shipping/handling which we must quote based on a specific verifiable UPS address. Flag kits are not returnable. The unique design of this high-quality, easy to install kit, features an adjustable clamp that mounts a 6' aluminum flagpole on fences & railings. Works on square, rectangular, round or oval shaped railings from 3/8” up to 2” in diameter. Works with fences and railings of virtually any material including wrought iron, aluminum, or wood. Meant only for balconies on ground-level front porch use, wrought iron and chain link fences around your home or business. All our kits are fundamentally for ground level use. Package includes the NeverFurl Rail Mount Bracket, 6-foot Aluminum Pole (1" diameter, 058" wall thickness, in 2 sections), Brass Acorn and 1" White NeverFurl Non-Furling Device, with Flag Clips. INCLUDES 3X5' Nylon American flag with Embroidered Stars and Sewn Stripes MADE IN USA

Scotland flag

These are the EZ Mount Rings that come with your kit. Like shoe laces, someday you may need another one. The EZ Mount Rings can crack if you tighten it too much, can just wear out, or you may lose or strip the thumb screw.

Flag and rotating side mount flagpole kit for those places where you need a sideways flag holder. This steel sideways bracket fits where others won't. Goes inside door frames, garage doors, on decks, or anyplace where you need a sideways mount flagpole holder. Works at any angle. You can install it as a perpendicular flag pole bracket or a side mount flag bracket.  Think of it as "the vinyl siding" flagpole kit.

Your flag is held on the pole with the EZ Mount pole ring. The flag is easy to mount and unmount with the thumb screw that grips the pole through the grommet.

Click to enlargeAmerican Flag Railing Kit #K27 $149.00 Plus shipping/handling which we must quote based on a specific verifiable UPS address. Flag kits are not returnable. The unique design of this high-quality, easy to install kit, features an adjustable clamp that mounts a 6' aluminum flagpole on fences & railings. Works on square, rectangular, round or oval shaped railings from 3/8” up to 2” in diameter. Works with fences and railings of virtually any material including wrought iron, aluminum, or wood. Meant only for balconies on ground-level front porch use, wrought iron and chain link fences around your home or business. All our kits are fundamentally for ground level use. Package includes the NeverFurl Rail Mount Bracket, 6-foot Aluminum Pole (1" diameter, 058" wall thickness, in 2 sections), Brass Acorn and 1" White NeverFurl Non-Furling Device, with Flag Clips. INCLUDES 3X5' Nylon American flag with Embroidered Stars and Sewn Stripes MADE IN USA

Every flag bracket and flagpole in the world can break: Pick the right hardware for the job! We have no hardware meant for motorcycles or other moving vehicles. I sell flag holders and kits for ground level typical front porch type use. If you are putting a flag kit on a high rise or on a multi story building hanging over a street you should be speaking with an engineer of some type. You need to determine if this hardware is suitable for your use. Flagpole holders and poles come in all kinds of sizes and shapes.

Same parts as the 3x5' Side Mount kit, but the Junior includes a smaller 2.5'x4' sleeved nylon flag and a shorter 5'x1" white rotating pole.

Yellow blue red flag

Upgrade to our even more massive Moose stainless steel bracket; provides a four-hole broader base footprint for greater strength, stability and gripping power to the mounting surface. Bright chrome mirror finish you'll be proud to display.

Norway FlagNational Flags Belgium, France, England and many others - Printed - irresistible price, express delay.

A major change in symbols took place in 1921, when Canada was granted a distinctive new coat of arms; it quartered the symbols of England, Scotland, Ireland, and France with three green maple leaves on a silver background. That shield replaced the 1868 original in Canadian ensigns three years later. In 1957 a revised artistic version incorporated red maple leaves instead of green “to show the maturity of the country.”

Northern Ireland Irish NIR NI Men Flag Clothes Autumn Cotton Long Sleeve Cowboy Casual Coat Fashion Turn-down Collar Jeans Shirt.

China flag

The establishment of the Canadian federation in 1867 was not accompanied by the creation of a special flag for the country. The imperial Union Jack and other British flags were considered sufficient, although a coat of arms (in the form of a heraldic shield) was granted by Queen Victoria in 1868. The Canadian shield was composed of the arms of the four original provinces—Ontario, Quebec, New Brunswick, and Nova Scotia. In 1892 this shield became a badge on the British Red Ensign, which served as a special civil ensign (later called the Canadian Red Ensign) for Canadian vessels. On land, that defaced ensign was used, without authorization, as an unofficial national flag combining Canadian patriotism and loyalty to Britain. Perhaps in imitation of the stars added to the United States flag whenever a new state joined the Union, Canadians routinely added official provincial shields to the arms of Canada. Flags with those shields were often decorated as well with the imperial crown, a wreath of maple leaves, and/or a beaver. The Union Jack continued to fly on land.

Embroidered stars and stripe American Flags with double stitching for all flagpoles!

Welslot have a collection of imported sandstone paving flags in stock. They are suitable for all garden spaces as well as drive ways. Call today!

20221127 — The organization had displayed Iran's national flag on social media without the emblem of the Islamic Republic to show "support for the ...

DES MOINES, Iowa (KWWL) -- Governor Kim Reynolds is ordering that all flags be flown at half-staff from sunrise until sunset today to honor fallen Navy ...