Aluminum Dock Mount Made for Telescoping and Sectional Poles Specifications are as follows:   Base plate is 8" square Shaft length is 12" tall Max inside diameter is 2 3/4 inches   The outside diameter of the shaft is approx. 3...

6 Inch Silver Light Duty Cast Aluminum Cleat. Distance between holes is 1 Inch. This is a replacement part for your residential flagpole. Used in conjunction with 1/4 inch flagpole rope.

This is the 56" length replacement bottom section for our 20' Tapered Aluminum Flagpole. 2 7/8" diameter at top end of this part 3" diameter at bottom end of this part Made from 16 Gauge Aluminum

Image

Made in the USA!   Sold as a Pair. Anchor flags the easy way with our re-usable nylon snaphooks.  The heavier the load, the tighter the grip. Suitable for flag sizes 2 ft. x 3ft. up to 4 ft. x 6 ft. flags. The high-impact plastic will...

This is the 56" length replacement top section for our 20' Tapered Aluminum Flagpole. 2" diameter at top end of this part 2" diameter at bottom end of this part Made from 16 Gauge Aluminum

Rope for flagpoles is unique. 1/4 Inch rope is typically used for residential flagpoles 30 feet tall and smaller. For commercial poles please order 5/16 Inch rope listed on our website. 1/4 inch rope is only recommended for residential flagpoles up to...

One Aluminum Side Mount Bracket Made for Telescoping and Sectional Poles Specifications are as follows:   Shaft Length 16 Inches Tall Mounting Brackets Are 1.5 x 6 Inches Max inside diameter is 2 3/4 inches   Includes 2 Inside PVC...

This is the replacement ground sleeve for a Valley Forge AFP20 and SFP18 flagpoles. Sleeve is : - 2 inch inside diameter - black PVC material - length is 20 inches.

This is the 56" length replacement 3rd from bottom section for our 20' Tapered Aluminum Flagpole. 2 1/8" diameter at top end of this part 2 1/2" diameter at bottom end of this part. Made from 16 Gauge Aluminum

A poly-carbonate swivel sleeve providing strength that will withstand the elements, not yellow in the sunlight Can by used for EZ Poles- telescoping inside diameter is 2-1/16”   Does not come with Spring...

This is the 56" length replacement second from bottom section (drilled for cleat) for our 20' Tapered Aluminum Flagpole. 2 1/2" diameter at top end of this part 3" diameter at bottom end of this part Made from 16 Gauge Aluminum

This is the 56" length replacement 4th from bottom section for our 20' Tapered Aluminum Flagpole. 2" diameter at top end of this part 2 1/8" diameter at bottom end of this part. Made from 16 Gauge Aluminum